0 Items
All Mag Box Issue Fixed!

All Mag Box Issue Fixed!

I recommend using the following images These will preserve portal settings, but disables the block and prevents any remote updates from Infomir’s servers. If you have already used previous custom firmware or installed any other “anti_block settings” then remove all settings to which you have access before trying to install this Better is to install original Infomir software first even by allowing updates and allowing them to complete is OK. This software will fix block later.
mag250  https://mega.nz/#F!Q4YkDKQT!46cNMVY-KRNIm3tYoGR0rg
mag254  https://mega.nz/#F!k0ImBCKA!bbNSbss1wXmOfxGK1Y2KdQ
mag256  https://mega.nz/#F!14QSBaqJ!95LkP7PoVbnTAA-2BqL7NA
mag322  https://mega.nz/#F!w0JE1ILA!6tDfPWlkbG1c6tuA4bTSew
mag324  https://mega.nz/#F!1hICAQwI!KsxN8jSyBs3Nx6ClJhuMog
some mag models will not have the Bootstrap included as a separate ‘file’ in that folder. That’s OK, just ensure you transfer the correct folder onto USB device.  
MAG254 and earlier can be picky about which sticks they recognize, you may need to try a few – don’t use USB3.0 sticks.
To ensure the installation works please install from the recovery area of Mag (hold down menu button during reboot) – Put files on usb (FAT32) in folder named mag*** (*** is your Magbox number e.g.mag256) – Reset to default first then use usb to downgrade.

 

Video guides for updating all MAGs are on Infomir site
Different for each type of box and need to be used with the specific instructions
e.g For 3 series = Guide: https://wiki.infomir.eu/eng/set-top…24-349-351/software-update-mag322-324-349-351And video can be found half way down page (ctrl +f search for video if you dont see it)
For 2 series except 256https://wiki.infomir.eu/eng/set-top…mag250-254-270/software-update-mag250-254-270Video half way down page
For 256https://wiki.infomir.eu/eng/set-top-box/stb-linux-webkit/mag256/software-update-mag256Video same as 2 series other stuff different

 

 

Duplex IPTV

Duplex IPTV is the most advanced and user friendly TV media player. With Duplex IPTV you will enjoy your favorite media content on your TV.
Features:

  • Supports selection of audio tracks and embedded subtitles
  • Saves recently played lists and resume playback from last saved position
  • Allows seek to precise position, you can drag the time slider to the precise position
  • Allows creation and customization of favorite groups for quick access
  • Supports embedded groups in playlists
  • Quickly search for items in playlists
  • And more …

 

Zgemma box

On Zgemma box you need to find the IP address:

  • Go to menu, system, information, network and make a note of the IP address

Google ‘PUTTY’ or click the link below:

Select this version if using windows:

Find PUTTY in your download folder

Open PUTTY and type in your IP address of Zgemma into the HOST name (or IP address) box

You will now see the screen below:

Type root and press enter

The copy the line I sent you

Go back to putty, right click and press enter

This will create your new BOUQUET called MY_BOUQUET where your channels will be

ADDING M3U FILE TO IPTV PLAYER ON ZGEMMA WITH IPTV PLAYER

Save the file I email to you onto your desktop

Download a program called ‘WINSCP’ – https://winscp.net/eng/index.php

Open WIN SCP

In host name type in the IP address of your Zgemma

Username type in root

On the right hand side box double click the 3 dots

Repeat above

Double click ‘HDD’

Double click ‘M3U file we sent you’

On the left hand side box, find the playlist you were sent you on your desktop

Right click on it

Click upload – once it says complete you have your M3U file on your Zgemma

Now go to your Zgemma remote

Press Menu, IPTV PLAYER,

Open Local Media

Then media/hdd, the M3U file we sent you

Click on your playlist and your channels will appear

Channels

ENJOY Your Watching with

Enigma2/Dreambox/Vu+

1- Go to your Enigma2 and get your IP address

Go to Settings/Setup/System Network Device Setup Adapter Settings

And get your IP address it starts with 192.168….

4 – Go to you windows PC and download Putty

Putty download url https://the.earth.li/~sgtatham/putty/latest/x86/putty.exe

5- Open Putty add follow this steps

add your IP address of your Enigma ( Same IP as step 3 ) Port 23 Connection type Telenet Click on open

6 – Your default login and password are root

7 – Copy your line  ( you will get it after you order your subscription )

8 – use RIGHT CLICK MOUSE BUTTON after you enter your line press ENTER

9 – Type reboot and your device will restart

Now you will find IPTV folder , all IPTV channels are inside your IPTV folder

Roku

Setup IPTV on Roku

1- Search for M3U Playlist Player into

  1. Go to Streaming channels
  2. Go to Search channels 
  3. And search fot M3U Playlist player
  4. And select M3u Playlist player

image

2- Click on Go to channels

image

3- Select New Playlist

image

4- add your Add IPTV GATOR A if you use Server A or add IPTV GATOR B  If you use Server B and press NEXT

image

Add here your M3U URL and press SAVE

image

  1. Wait for loading channels
  2. Restart your app
  3. select the playlist you add
Now you are ready to watch channels on your Roku box
mart stb guide for samsung smart tv

An emulator based on magbox and actually gives you a real feel of a digital box with Smart STB gives you a stable view of all channels and everything is sorted in order.
Even here you get a test period of 7 days ago, we recommend that you buy the app for $ 270.
Download Smart STB
Start the app when you see Loading portal on the tv then press ok (middle button)
1. Go to system settings
2. Write down the Virtua mac address and security check the mac address then you specify it when applying for a test or subscription purchase.
3.Create now to https://smart-stb.net/ and create an account
4.Click the Device Mac Mac address on Smart STB website
5. Under Portals, type the following:  (You get it from us.)
6. Select Save

Smart TV

This tutorial will guide you through the simple setup instruction for a Samsung/LG Smart TV. BestofIPTV service uses a media controller app called ‘Smart IPTV’, this app is free to use for a period of seven days, you will then be asked to make a one time donation of € 5.49 (Euros) towards the Smart IPTV app development.

  1. In order to check if your Samsung or LG Smart TV is compatible with the BestofIPTV Service go to the Samsung or LG Smart TV screen and search for the ‘Smart IPTV’ app. If the app is not displayed on the main screen you may have to search for it in ‘All Apps’ or ‘Updates’.
  2. Launch the ‘Smart TV’ app.
  3. Make a note of the ‘MAC Address’ which is displayed on the screen.
  4. Go to http://siptv.eu/mylist/ from any web browser.
  5. Go to the section titled ‘Add external playlist links (URLs)’ and enter your ‘Mac’ address and the unique BestofIPTV Playlist URL into the ‘Link’ field.
    NB: If you do not have a playlist URL you can request a trial here: Request Trial
  6. Ensure the ‘countries’ dropdown selection on ‘Various’.
  7. If you have any problems with the playlist loading you can place a check in the ‘Keep online’ checkbox.
  8. Click onto the ‘Add Link’ button
  9. Restart the ‘Smart IPTV’ app or TV.
  10.  In order to view channel groups, press the blue button on your remote control.

1 – Download Smart IPTV into your TV

( This is only for Samsung and LG Smart TV )

  1. Go to you TV apps
  2. Search for Smart IPTV
  3. Install Smart IPTV and open Smart IPTV

Now you can see your MAC address on the right side on your screen

2- Add channels into Smart IPTV

  1. Go to www.siptv.eu/mylist/
  2. Add your MAC and your M3U URL
  3. Click on Add Link

Smart IPTV app insctruction

Now you are ready to watch our channels

important to know!!

After you install the app it is free to use for only 7 days after that you need to buy this app for 5,49EUR/lifetime

Go to http://siptv.eu/activation/ and activate for lifetime

How to configure Kodi for IPTV

Firstly, you must have your m3u file on the device you want to use it on(android box, fire stick, pc etc)
Download Kodi :
Now, on Kodi go to:

System > TV > General > Enabled.

It will tell you there is no PVR add-on enabled, click OK.
It will now present you with a list of PVR clients.
Scroll down to “PVR IPTV Simple Client“, click it. 

Click Configure.

On the General tab, change the location to either local path(if the m3u file is located on your android box/stick/pc had drive) or remote path(if its hosted on the web), and then locate your m3u file.
paste your M3U line over there.

press “EPG Settings” tab and paste EPG’s Link

Then click “Channels Logos” tab and set “Channels Logos from XMLTV” on “Prefer M3U”, finally press “OK”.

Now click on “Enable” button. 

Then press the X to close the menu, and press the kodi home button. Now exit the app.

Restart Kodi; you should notice “PVR manager is starting up” and it will begin loading the channels.

You will now notice a TV section on kodi, go inside that and you will see your channels.

Now simply select a channel, allow it to load/buffer(will depend on your internet speed) and there you have it. GenIPTV working on a Kodi PVR client, as opposed to having a program that loads channels (ike Stalker).

You can click on “Guide” button and see channels’ EPG.

 

EPG Guide links

DK –http://estiptv.site/epg/DK_guide.xml.gz or http://estiptv.site/epg/DK_guide.xml
EE – http://estiptv.site/epg/EE_guide.xml.gz or http://estiptv.site/epg/EE_guide.xml
FI – http://estiptv.site/epg/FI_guide.xml.gz or http://estiptv.site/epg/FI_guide.xml
NO – http://estiptv.site/epg/NO_guide.xml.gz or http://estiptv.site/epg/NO_guide.xml
SE – http://estiptv.site/epg/SE_guide.xml.gz or http://estiptv.site/epg/SE_guide.xml
BE/NL – http://estiptv.site/epg/NL_guide.xml.gz or http://estiptv.site/epg/NL_guide.xml
DE – http://estiptv.site/epg/DE_guide.xml.gz or http://estiptv.site/epg/DE_guide.xml
ES – http://estiptv.site/epg/ES_guide.xml.gz or http://estiptv.site/epg/ES_guide.xml
FR – http://estiptv.site/epg/FR_guide.xml.gz or http://estiptv.site/epg/FR_guide.xml
UK – http://estiptv.site/epg/UK_guide.xml.gz or http://estiptv.site/epg/UK_guide.xml
IT – http://estiptv.site/epg/IT_guide.xml.gz or http://estiptv.site/epg/IT_guide.xml
ex-Yu http://estiptv.site/epg/EY_guide.xml.gz or http://estiptv.site/epg/EY_guide.xml
PL – http://estiptv.site/epg/PL_guide.xml.gz or http://estiptv.site/epg/PL_guide.xml
RU – http://estiptv.site/epg/RU_guide.xml.gz or http://estiptv.site/epg/RU_guide.xml
TR – http://estiptv.site/epg/TR_guide.xml.gz or http://estiptv.site/epg/TR_guide.xml
MX – http://estiptv.site/epg/MX_guide.xml.gz or http://estiptv.site/epg/MX_guide.xml
US – http://estiptv.site/epg/US_guide.xml.gz or http://estiptv.site/epg/US_guide.xml
DK/EE/FI/NO/SE – http://estiptv.site/epg/SCAND_guide.xml.gz or http://estiptv.site/epg/SCAND_guide.xml
BE/NL/DE/ES/FR/UK/IT – http://estiptv.site/epg/EU_guide.xml.gz or http://estiptv.site/epg/EU_guide.xml
EY/PL/RU/TR – http://estiptv.site/epg/EEU_guide.xml.gz or http://estiptv.site/epg/EEU_guide.xml
MX/US – http://estiptv.site/epg/AMER_guide.xml.gz or http://estiptv.site/epg/AMER_guide.xml
SCAND/EU/EEU/AMER – http://estiptv.site/epg/IPTV_guide.xml.gz or http://estiptv.site/epg/IPTV_guide.xml

Press OK

Restart Kodi

EPG Program info

DK – http://estiptv.site/epg/DK_guide.xml.gz or http://estiptv.site/epg/DK_guide.xml

EE – http://estiptv.site/epg/EE_guide.xml.gz or http://estiptv.site/epg/EE_guide.xml

FI – http://estiptv.site/epg/FI_guide.xml.gz or http://estiptv.site/epg/FI_guide.xml

NO – http://estiptv.site/epg/NO_guide.xml.gz or http://estiptv.site/epg/NO_guide.xml

SE – http://estiptv.site/epg/SE_guide.xml.gz or http://estiptv.site/epg/SE_guide.xml

BE/NL – http://estiptv.site/epg/NL_guide.xml.gzor http://estiptv.site/epg/NL_guide.xml

DE – http://estiptv.site/epg/DE_guide.xml.gz or http://estiptv.site/epg/DE_guide.xml

ES – http://estiptv.site/epg/ES_guide.xml.gz or http://estiptv.site/epg/ES_guide.xml

PT – http://estiptv.site/epg/PT_guide.xml.gz or http://estiptv.site/epg/PT_guide.xml

FR – http://estiptv.site/epg/FR_guide.xml.gz or http://estiptv.site/epg/FR_guide.xml

UK – http://estiptv.site/epg/UK_guide.xml.gz or http://estiptv.site/epg/UK_guide.xml

IT – http://estiptv.site/epg/IT_guide.xml.gz or http://estiptv.site/epg/IT_guide.xml

EX-YU http://estiptv.site/epg/EY_guide.xml.gz or http://estiptv.site/epg/EY_guide.xml

PL – http://estiptv.site/epg/PL_guide.xml.gz or http://estiptv.site/epg/PL_guide.xml

RU – http://estiptv.site/epg/RU_guide.xml.gz or http://estiptv.site/epg/RU_guide.xml

TR – http://estiptv.site/epg/TR_guide.xml.gz or http://estiptv.site/epg/TR_guide.xml

MX – http://estiptv.site/epg/MX_guide.xml.gz or http://estiptv.site/epg/MX_guide.xml

US – http://estiptv.site/epg/US_guide.xml.gz or http://estiptv.site/epg/US_guide.xml

DK/EE/FI/NO/SE – http://estiptv.site/epg/SCAND_guide.xml.gz or http://estiptv.site/epg/SCAND_guide.xml

BE/NL/DE/ES/PT/FR/UK/IT – http://estiptv.site/epg/EU_guide.xml.gz or http://estiptv.site/epg/EU_guide.xml

EY/PL/RU/TR – http://estiptv.site/epg/EEU_guide.xml.gz or http://estiptv.site/epg/EEU_guide.xml

MX/US – http://estiptv.site/epg/AMER_guide.xml.gz or http://estiptv.site/epg/AMER_guide.xml

SCAND/EU/EEU/AMER – http://estiptv.site/epg/IPTV_guide.xml.gz or http://estiptv.site/epg/IPTV_guide.xml

Mag iptv box

Go to Settings then System Settings
2. Go to Software Update, then press OK then the Red button to update the software. Wait a few minutes and the box will restart.
3. Go to Settings then System Settings.
4. Go to Video and change to 1080p and 1920 × 1080 Press OK and go back (SHIPPING THIS MAG256 STEP IF IT MAKES THIS SELL)
5. Go to Servers
6. Go to General and enter pool.ntp.org press OK and go back
7. Touch Portals
8. In the First Portal, enter this
Portal Name: Bestofiptv
Portal URL: (You get it from us.)
You do not need to fill in any other Portals. Press OK to save and return.
9. Go to Advanced Settings and change time zone to your zone to get EPG functioning. Press OK to save
Now you go back until you get out, the box will say it needs to reboot to use the new settings. Let it restart.
Now you come to IPTV Portal. Before you start watching TV, do one last thing. Go to Right until you reach Settings, then Advanced Settings and change Buffer Size from 0 to 15, scroll down the list and press OK.
Now you can start watching TV.

Supports Popular Applications

VLC Player

If you would like to watch your  IPTV on your PC, VLC player is the easiest and mostly used app for windows and iOS devices. You can also use its android version on your mobile devices.

Perfect player

If you are not a computer person, Perfect Player would be a good option for you. Installing and using of this application is very user friendly. You won’t be able to have Catch up feature with this app. And for the EPG, please ask from our customer service for the addition URL for EPG.

GSE Smartiptv

You may find many apps for your iOS devices, but if you are looking for a free and high quality app for iPhone and iPad, we strongly suggest you to install GSE player. Android users can also install it into their mobile devices. Installation if very easy with one playlist URL that you will receive from us.

Smartiptv

If you have Samsung or LG Smart TV, this app will replace your smart iptv app or any box attached to your TV. No hardware required! And very easy to install from your TV’s apps.

Your TV’s remote control will also help you navigate thru our live channels and videos.

Perfect Player IPTV

Go to Google Play store and download Perfect Player IPTV

Download URL : Click here

Please follow all 14 steps 

1 – Open Perfect Player

image

2 – Go to Settings

image

3 – Now you are into Settings Page , Go to Genaral

image

4 – Go to Playlist and enter your URL and add by Name ALL IPTV after you done click on OK

image

5 – Go to EPG

image

6 – Enter your EPG URL after you done click on OK

image

7 – Go back to your Settings Page and go to Playback

image

8 – Check ONLY change system volume

image

9 – Go back to your Settings Page and go to GUI

10 – Check ONLY Show channels as group folder

11 – Restart Perfect Player

12 – Now you see channels list on the left side

13 – Press left button on the remote controller now you have all channels on group folder

14 – Go to any folder and enjoy to watch all channels

FORMULER BOX (Z7, Z8)

Go into the app MY TVOnline
You will get a pop up box, click edit,
– Portal name: BestofIPTV
– Portal URL:  (You get it from us.)
– then press “save”

All Mag Box Issue Fixed!

All Mag Box Issue Fixed!

I recommend using the following images These will preserve portal settings, but disables the block and prevents any remote updates from Infomir’s servers. If you have already used previous custom firmware or installed any other “anti_block settings” then remove all settings to which you have access before trying to install this Better is to install original Infomir software first even by allowing updates and allowing them to complete is OK. This software will fix block later.
mag250  https://mega.nz/#F!Q4YkDKQT!46cNMVY-KRNIm3tYoGR0rg
mag254  https://mega.nz/#F!k0ImBCKA!bbNSbss1wXmOfxGK1Y2KdQ
mag256  https://mega.nz/#F!14QSBaqJ!95LkP7PoVbnTAA-2BqL7NA
mag322  https://mega.nz/#F!w0JE1ILA!6tDfPWlkbG1c6tuA4bTSew
mag324  https://mega.nz/#F!1hICAQwI!KsxN8jSyBs3Nx6ClJhuMog
some mag models will not have the Bootstrap included as a separate ‘file’ in that folder. That’s OK, just ensure you transfer the correct folder onto USB device.  
MAG254 and earlier can be picky about which sticks they recognize, you may need to try a few – don’t use USB3.0 sticks.
To ensure the installation works please install from the recovery area of Mag (hold down menu button during reboot) – Put files on usb (FAT32) in folder named mag*** (*** is your Magbox number e.g.mag256) – Reset to default first then use usb to downgrade.

 

Video guides for updating all MAGs are on Infomir site
Different for each type of box and need to be used with the specific instructions
e.g For 3 series = Guide: https://wiki.infomir.eu/eng/set-top…24-349-351/software-update-mag322-324-349-351And video can be found half way down page (ctrl +f search for video if you dont see it)
For 2 series except 256https://wiki.infomir.eu/eng/set-top…mag250-254-270/software-update-mag250-254-270Video half way down page
For 256https://wiki.infomir.eu/eng/set-top-box/stb-linux-webkit/mag256/software-update-mag256Video same as 2 series other stuff different

 

 

Zgemma box

On Zgemma box you need to find the IP address:

  • Go to menu, system, information, network and make a note of the IP address

Google ‘PUTTY’ or click the link below:

Select this version if using windows:

Find PUTTY in your download folder

Open PUTTY and type in your IP address of Zgemma into the HOST name (or IP address) box

You will now see the screen below:

Type root and press enter

The copy the line I sent you

Go back to putty, right click and press enter

This will create your new BOUQUET called MY_BOUQUET where your channels will be

ADDING M3U FILE TO IPTV PLAYER ON ZGEMMA WITH IPTV PLAYER

Save the file I email to you onto your desktop

Download a program called ‘WINSCP’ – https://winscp.net/eng/index.php

Open WIN SCP

In host name type in the IP address of your Zgemma

Username type in root

On the right hand side box double click the 3 dots

Repeat above

Double click ‘HDD’

Double click ‘M3U file we sent you’

On the left hand side box, find the playlist you were sent you on your desktop

Right click on it

Click upload – once it says complete you have your M3U file on your Zgemma

Now go to your Zgemma remote

Press Menu, IPTV PLAYER,

Open Local Media

Then media/hdd, the M3U file we sent you

Click on your playlist and your channels will appear

Channels

ENJOY Your Watching with

Enigma2/Dreambox/Vu+

1- Go to your Enigma2 and get your IP address

Go to Settings/Setup/System Network Device Setup Adapter Settings

And get your IP address it starts with 192.168….

4 – Go to you windows PC and download Putty

Putty download url https://the.earth.li/~sgtatham/putty/latest/x86/putty.exe

5- Open Putty add follow this steps

add your IP address of your Enigma ( Same IP as step 3 ) Port 23 Connection type Telenet Click on open

6 – Your default login and password are root

7 – Copy your line  ( you will get it after you order your subscription )

8 – use RIGHT CLICK MOUSE BUTTON after you enter your line press ENTER

9 – Type reboot and your device will restart

Now you will find IPTV folder , all IPTV channels are inside your IPTV folder

Roku

Setup IPTV on Roku

1- Search for M3U Playlist Player into

  1. Go to Streaming channels
  2. Go to Search channels 
  3. And search fot M3U Playlist player
  4. And select M3u Playlist player

image

2- Click on Go to channels

image

3- Select New Playlist

image

4- add your Add IPTV GATOR A if you use Server A or add IPTV GATOR B  If you use Server B and press NEXT

image

Add here your M3U URL and press SAVE

image

  1. Wait for loading channels
  2. Restart your app
  3. select the playlist you add
Now you are ready to watch channels on your Roku box
mart stb guide for samsung smart tv

An emulator based on magbox and actually gives you a real feel of a digital box with Smart STB gives you a stable view of all channels and everything is sorted in order.
Even here you get a test period of 7 days ago, we recommend that you buy the app for $ 270.
Download Smart STB
Start the app when you see Loading portal on the tv then press ok (middle button)
1. Go to system settings
2. Write down the Virtua mac address and security check the mac address then you specify it when applying for a test or subscription purchase.
3.Create now to https://smart-stb.net/ and create an account
4.Click the Device Mac Mac address on Smart STB website
5. Under Portals, type the following:  (You get it from us.)
6. Select Save

Smart TV

This tutorial will guide you through the simple setup instruction for a Samsung/LG Smart TV. BestofIPTV service uses a media controller app called ‘Smart IPTV’, this app is free to use for a period of seven days, you will then be asked to make a one time donation of € 5.49 (Euros) towards the Smart IPTV app development.

  1. In order to check if your Samsung or LG Smart TV is compatible with the BestofIPTV Service go to the Samsung or LG Smart TV screen and search for the ‘Smart IPTV’ app. If the app is not displayed on the main screen you may have to search for it in ‘All Apps’ or ‘Updates’.
  2. Launch the ‘Smart TV’ app.
  3. Make a note of the ‘MAC Address’ which is displayed on the screen.
  4. Go to http://siptv.eu/mylist/ from any web browser.
  5. Go to the section titled ‘Add external playlist links (URLs)’ and enter your ‘Mac’ address and the unique BestofIPTV Playlist URL into the ‘Link’ field.
    NB: If you do not have a playlist URL you can request a trial here: Request Trial
  6. Ensure the ‘countries’ dropdown selection on ‘Various’.
  7. If you have any problems with the playlist loading you can place a check in the ‘Keep online’ checkbox.
  8. Click onto the ‘Add Link’ button
  9. Restart the ‘Smart IPTV’ app or TV.
  10.  In order to view channel groups, press the blue button on your remote control.

1 – Download Smart IPTV into your TV

( This is only for Samsung and LG Smart TV )

  1. Go to you TV apps
  2. Search for Smart IPTV
  3. Install Smart IPTV and open Smart IPTV

Now you can see your MAC address on the right side on your screen

2- Add channels into Smart IPTV

  1. Go to www.siptv.eu/mylist/
  2. Add your MAC and your M3U URL
  3. Click on Add Link

Smart IPTV app insctruction

Now you are ready to watch our channels

important to know!!

After you install the app it is free to use for only 7 days after that you need to buy this app for 5,49EUR/lifetime

Go to http://siptv.eu/activation/ and activate for lifetime

How to configure Kodi for IPTV

Firstly, you must have your m3u file on the device you want to use it on(android box, fire stick, pc etc)
Download Kodi :
Now, on Kodi go to:

System > TV > General > Enabled.

It will tell you there is no PVR add-on enabled, click OK.
It will now present you with a list of PVR clients.
Scroll down to “PVR IPTV Simple Client“, click it. 

Click Configure.

On the General tab, change the location to either local path(if the m3u file is located on your android box/stick/pc had drive) or remote path(if its hosted on the web), and then locate your m3u file.
paste your M3U line over there.

press “EPG Settings” tab and paste EPG’s Link

Then click “Channels Logos” tab and set “Channels Logos from XMLTV” on “Prefer M3U”, finally press “OK”.

Now click on “Enable” button. 

Then press the X to close the menu, and press the kodi home button. Now exit the app.

Restart Kodi; you should notice “PVR manager is starting up” and it will begin loading the channels.

You will now notice a TV section on kodi, go inside that and you will see your channels.

Now simply select a channel, allow it to load/buffer(will depend on your internet speed) and there you have it. GenIPTV working on a Kodi PVR client, as opposed to having a program that loads channels (ike Stalker).

You can click on “Guide” button and see channels’ EPG.

 

EPG Guide links

DK –http://estiptv.site/epg/DK_guide.xml.gz or http://estiptv.site/epg/DK_guide.xml
EE – http://estiptv.site/epg/EE_guide.xml.gz or http://estiptv.site/epg/EE_guide.xml
FI – http://estiptv.site/epg/FI_guide.xml.gz or http://estiptv.site/epg/FI_guide.xml
NO – http://estiptv.site/epg/NO_guide.xml.gz or http://estiptv.site/epg/NO_guide.xml
SE – http://estiptv.site/epg/SE_guide.xml.gz or http://estiptv.site/epg/SE_guide.xml
BE/NL – http://estiptv.site/epg/NL_guide.xml.gz or http://estiptv.site/epg/NL_guide.xml
DE – http://estiptv.site/epg/DE_guide.xml.gz or http://estiptv.site/epg/DE_guide.xml
ES – http://estiptv.site/epg/ES_guide.xml.gz or http://estiptv.site/epg/ES_guide.xml
FR – http://estiptv.site/epg/FR_guide.xml.gz or http://estiptv.site/epg/FR_guide.xml
UK – http://estiptv.site/epg/UK_guide.xml.gz or http://estiptv.site/epg/UK_guide.xml
IT – http://estiptv.site/epg/IT_guide.xml.gz or http://estiptv.site/epg/IT_guide.xml
ex-Yu http://estiptv.site/epg/EY_guide.xml.gz or http://estiptv.site/epg/EY_guide.xml
PL – http://estiptv.site/epg/PL_guide.xml.gz or http://estiptv.site/epg/PL_guide.xml
RU – http://estiptv.site/epg/RU_guide.xml.gz or http://estiptv.site/epg/RU_guide.xml
TR – http://estiptv.site/epg/TR_guide.xml.gz or http://estiptv.site/epg/TR_guide.xml
MX – http://estiptv.site/epg/MX_guide.xml.gz or http://estiptv.site/epg/MX_guide.xml
US – http://estiptv.site/epg/US_guide.xml.gz or http://estiptv.site/epg/US_guide.xml
DK/EE/FI/NO/SE – http://estiptv.site/epg/SCAND_guide.xml.gz or http://estiptv.site/epg/SCAND_guide.xml
BE/NL/DE/ES/FR/UK/IT – http://estiptv.site/epg/EU_guide.xml.gz or http://estiptv.site/epg/EU_guide.xml
EY/PL/RU/TR – http://estiptv.site/epg/EEU_guide.xml.gz or http://estiptv.site/epg/EEU_guide.xml
MX/US – http://estiptv.site/epg/AMER_guide.xml.gz or http://estiptv.site/epg/AMER_guide.xml
SCAND/EU/EEU/AMER – http://estiptv.site/epg/IPTV_guide.xml.gz or http://estiptv.site/epg/IPTV_guide.xml

Press OK

Restart Kodi

EPG Program info

DK – http://estiptv.site/epg/DK_guide.xml.gz or http://estiptv.site/epg/DK_guide.xml

EE – http://estiptv.site/epg/EE_guide.xml.gz or http://estiptv.site/epg/EE_guide.xml

FI – http://estiptv.site/epg/FI_guide.xml.gz or http://estiptv.site/epg/FI_guide.xml

NO – http://estiptv.site/epg/NO_guide.xml.gz or http://estiptv.site/epg/NO_guide.xml

SE – http://estiptv.site/epg/SE_guide.xml.gz or http://estiptv.site/epg/SE_guide.xml

BE/NL – http://estiptv.site/epg/NL_guide.xml.gzor http://estiptv.site/epg/NL_guide.xml

DE – http://estiptv.site/epg/DE_guide.xml.gz or http://estiptv.site/epg/DE_guide.xml

ES – http://estiptv.site/epg/ES_guide.xml.gz or http://estiptv.site/epg/ES_guide.xml

PT – http://estiptv.site/epg/PT_guide.xml.gz or http://estiptv.site/epg/PT_guide.xml

FR – http://estiptv.site/epg/FR_guide.xml.gz or http://estiptv.site/epg/FR_guide.xml

UK – http://estiptv.site/epg/UK_guide.xml.gz or http://estiptv.site/epg/UK_guide.xml

IT – http://estiptv.site/epg/IT_guide.xml.gz or http://estiptv.site/epg/IT_guide.xml

EX-YU http://estiptv.site/epg/EY_guide.xml.gz or http://estiptv.site/epg/EY_guide.xml

PL – http://estiptv.site/epg/PL_guide.xml.gz or http://estiptv.site/epg/PL_guide.xml

RU – http://estiptv.site/epg/RU_guide.xml.gz or http://estiptv.site/epg/RU_guide.xml

TR – http://estiptv.site/epg/TR_guide.xml.gz or http://estiptv.site/epg/TR_guide.xml

MX – http://estiptv.site/epg/MX_guide.xml.gz or http://estiptv.site/epg/MX_guide.xml

US – http://estiptv.site/epg/US_guide.xml.gz or http://estiptv.site/epg/US_guide.xml

DK/EE/FI/NO/SE – http://estiptv.site/epg/SCAND_guide.xml.gz or http://estiptv.site/epg/SCAND_guide.xml

BE/NL/DE/ES/PT/FR/UK/IT – http://estiptv.site/epg/EU_guide.xml.gz or http://estiptv.site/epg/EU_guide.xml

EY/PL/RU/TR – http://estiptv.site/epg/EEU_guide.xml.gz or http://estiptv.site/epg/EEU_guide.xml

MX/US – http://estiptv.site/epg/AMER_guide.xml.gz or http://estiptv.site/epg/AMER_guide.xml

SCAND/EU/EEU/AMER – http://estiptv.site/epg/IPTV_guide.xml.gz or http://estiptv.site/epg/IPTV_guide.xml

Mag iptv box

Go to Settings then System Settings
2. Go to Software Update, then press OK then the Red button to update the software. Wait a few minutes and the box will restart.
3. Go to Settings then System Settings.
4. Go to Video and change to 1080p and 1920 × 1080 Press OK and go back (SHIPPING THIS MAG256 STEP IF IT MAKES THIS SELL)
5. Go to Servers
6. Go to General and enter pool.ntp.org press OK and go back
7. Touch Portals
8. In the First Portal, enter this
Portal Name: Bestofiptv
Portal URL: (You get it from us.)
You do not need to fill in any other Portals. Press OK to save and return.
9. Go to Advanced Settings and change time zone to your zone to get EPG functioning. Press OK to save
Now you go back until you get out, the box will say it needs to reboot to use the new settings. Let it restart.
Now you come to IPTV Portal. Before you start watching TV, do one last thing. Go to Right until you reach Settings, then Advanced Settings and change Buffer Size from 0 to 15, scroll down the list and press OK.
Now you can start watching TV.

Supports Popular Applications

VLC Player

If you would like to watch your  IPTV on your PC, VLC player is the easiest and mostly used app for windows and iOS devices. You can also use its android version on your mobile devices.

Perfect player

If you are not a computer person, Perfect Player would be a good option for you. Installing and using of this application is very user friendly. You won’t be able to have Catch up feature with this app. And for the EPG, please ask from our customer service for the addition URL for EPG.

GSE Smartiptv

You may find many apps for your iOS devices, but if you are looking for a free and high quality app for iPhone and iPad, we strongly suggest you to install GSE player. Android users can also install it into their mobile devices. Installation if very easy with one playlist URL that you will receive from us.

Smartiptv

If you have Samsung or LG Smart TV, this app will replace your smart iptv app or any box attached to your TV. No hardware required! And very easy to install from your TV’s apps.

Your TV’s remote control will also help you navigate thru our live channels and videos.

Perfect Player IPTV

Go to Google Play store and download Perfect Player IPTV

Download URL : Click here

Please follow all 14 steps 

1 – Open Perfect Player

image

2 – Go to Settings

image

3 – Now you are into Settings Page , Go to Genaral

image

4 – Go to Playlist and enter your URL and add by Name ALL IPTV after you done click on OK

image

5 – Go to EPG

image

6 – Enter your EPG URL after you done click on OK

image

7 – Go back to your Settings Page and go to Playback

image

8 – Check ONLY change system volume

image

9 – Go back to your Settings Page and go to GUI

10 – Check ONLY Show channels as group folder

11 – Restart Perfect Player

12 – Now you see channels list on the left side

13 – Press left button on the remote controller now you have all channels on group folder

14 – Go to any folder and enjoy to watch all channels

FORMULER BOX (Z7, Z8)

Go into the app MY TVOnline
You will get a pop up box, click edit,
– Portal name: BestofIPTV
– Portal URL:  (You get it from us.)
– then press “save”

All Mag Box Issue Fixed!

All Mag Box Issue Fixed!

I recommend using the following images These will preserve portal settings, but disables the block and prevents any remote updates from Infomir’s servers. If you have already used previous custom firmware or installed any other “anti_block settings” then remove all settings to which you have access before trying to install this Better is to install original Infomir software first even by allowing updates and allowing them to complete is OK. This software will fix block later.
mag250  https://mega.nz/#F!Q4YkDKQT!46cNMVY-KRNIm3tYoGR0rg
mag254  https://mega.nz/#F!k0ImBCKA!bbNSbss1wXmOfxGK1Y2KdQ
mag256  https://mega.nz/#F!14QSBaqJ!95LkP7PoVbnTAA-2BqL7NA
mag322  https://mega.nz/#F!w0JE1ILA!6tDfPWlkbG1c6tuA4bTSew
mag324  https://mega.nz/#F!1hICAQwI!KsxN8jSyBs3Nx6ClJhuMog
some mag models will not have the Bootstrap included as a separate ‘file’ in that folder. That’s OK, just ensure you transfer the correct folder onto USB device.  
MAG254 and earlier can be picky about which sticks they recognize, you may need to try a few – don’t use USB3.0 sticks.
To ensure the installation works please install from the recovery area of Mag (hold down menu button during reboot) – Put files on usb (FAT32) in folder named mag*** (*** is your Magbox number e.g.mag256) – Reset to default first then use usb to downgrade.

 

Video guides for updating all MAGs are on Infomir site
Different for each type of box and need to be used with the specific instructions
e.g For 3 series = Guide: https://wiki.infomir.eu/eng/set-top…24-349-351/software-update-mag322-324-349-351And video can be found half way down page (ctrl +f search for video if you dont see it)
For 2 series except 256https://wiki.infomir.eu/eng/set-top…mag250-254-270/software-update-mag250-254-270Video half way down page
For 256https://wiki.infomir.eu/eng/set-top-box/stb-linux-webkit/mag256/software-update-mag256Video same as 2 series other stuff different

 

 

Zgemma box

On Zgemma box you need to find the IP address:

  • Go to menu, system, information, network and make a note of the IP address

Google ‘PUTTY’ or click the link below:

Select this version if using windows:

Find PUTTY in your download folder

Open PUTTY and type in your IP address of Zgemma into the HOST name (or IP address) box

You will now see the screen below:

Type root and press enter

The copy the line I sent you

Go back to putty, right click and press enter

This will create your new BOUQUET called MY_BOUQUET where your channels will be

ADDING M3U FILE TO IPTV PLAYER ON ZGEMMA WITH IPTV PLAYER

Save the file I email to you onto your desktop

Download a program called ‘WINSCP’ – https://winscp.net/eng/index.php

Open WIN SCP

In host name type in the IP address of your Zgemma

Username type in root

On the right hand side box double click the 3 dots

Repeat above

Double click ‘HDD’

Double click ‘M3U file we sent you’

On the left hand side box, find the playlist you were sent you on your desktop

Right click on it

Click upload – once it says complete you have your M3U file on your Zgemma

Now go to your Zgemma remote

Press Menu, IPTV PLAYER,

Open Local Media

Then media/hdd, the M3U file we sent you

Click on your playlist and your channels will appear

Channels

ENJOY Your Watching with

Enigma2/Dreambox/Vu+

1- Go to your Enigma2 and get your IP address

Go to Settings/Setup/System Network Device Setup Adapter Settings

And get your IP address it starts with 192.168….

4 – Go to you windows PC and download Putty

Putty download url https://the.earth.li/~sgtatham/putty/latest/x86/putty.exe

5- Open Putty add follow this steps

add your IP address of your Enigma ( Same IP as step 3 ) Port 23 Connection type Telenet Click on open

6 – Your default login and password are root

7 – Copy your line  ( you will get it after you order your subscription )

8 – use RIGHT CLICK MOUSE BUTTON after you enter your line press ENTER

9 – Type reboot and your device will restart

Now you will find IPTV folder , all IPTV channels are inside your IPTV folder

Roku

Setup IPTV on Roku

1- Search for M3U Playlist Player into

  1. Go to Streaming channels
  2. Go to Search channels 
  3. And search fot M3U Playlist player
  4. And select M3u Playlist player

image

2- Click on Go to channels

image

3- Select New Playlist

image

4- add your Add IPTV GATOR A if you use Server A or add IPTV GATOR B  If you use Server B and press NEXT

image

Add here your M3U URL and press SAVE

image

  1. Wait for loading channels
  2. Restart your app
  3. select the playlist you add
Now you are ready to watch channels on your Roku box
mart stb guide for samsung smart tv

An emulator based on magbox and actually gives you a real feel of a digital box with Smart STB gives you a stable view of all channels and everything is sorted in order.
Even here you get a test period of 7 days ago, we recommend that you buy the app for $ 270.
Download Smart STB
Start the app when you see Loading portal on the tv then press ok (middle button)
1. Go to system settings
2. Write down the Virtua mac address and security check the mac address then you specify it when applying for a test or subscription purchase.
3.Create now to https://smart-stb.net/ and create an account
4.Click the Device Mac Mac address on Smart STB website
5. Under Portals, type the following:  (You get it from us.)
6. Select Save

Smart TV

This tutorial will guide you through the simple setup instruction for a Samsung/LG Smart TV. BestofIPTV service uses a media controller app called ‘Smart IPTV’, this app is free to use for a period of seven days, you will then be asked to make a one time donation of € 5.49 (Euros) towards the Smart IPTV app development.

  1. In order to check if your Samsung or LG Smart TV is compatible with the BestofIPTV Service go to the Samsung or LG Smart TV screen and search for the ‘Smart IPTV’ app. If the app is not displayed on the main screen you may have to search for it in ‘All Apps’ or ‘Updates’.
  2. Launch the ‘Smart TV’ app.
  3. Make a note of the ‘MAC Address’ which is displayed on the screen.
  4. Go to http://siptv.eu/mylist/ from any web browser.
  5. Go to the section titled ‘Add external playlist links (URLs)’ and enter your ‘Mac’ address and the unique BestofIPTV Playlist URL into the ‘Link’ field.
    NB: If you do not have a playlist URL you can request a trial here: Request Trial
  6. Ensure the ‘countries’ dropdown selection on ‘Various’.
  7. If you have any problems with the playlist loading you can place a check in the ‘Keep online’ checkbox.
  8. Click onto the ‘Add Link’ button
  9. Restart the ‘Smart IPTV’ app or TV.
  10.  In order to view channel groups, press the blue button on your remote control.

1 – Download Smart IPTV into your TV

( This is only for Samsung and LG Smart TV )

  1. Go to you TV apps
  2. Search for Smart IPTV
  3. Install Smart IPTV and open Smart IPTV

Now you can see your MAC address on the right side on your screen

2- Add channels into Smart IPTV

  1. Go to www.siptv.eu/mylist/
  2. Add your MAC and your M3U URL
  3. Click on Add Link

Smart IPTV app insctruction

Now you are ready to watch our channels

important to know!!

After you install the app it is free to use for only 7 days after that you need to buy this app for 5,49EUR/lifetime

Go to http://siptv.eu/activation/ and activate for lifetime

How to configure Kodi for IPTV

Firstly, you must have your m3u file on the device you want to use it on(android box, fire stick, pc etc)
Download Kodi :
Now, on Kodi go to:

System > TV > General > Enabled.

It will tell you there is no PVR add-on enabled, click OK.
It will now present you with a list of PVR clients.
Scroll down to “PVR IPTV Simple Client“, click it. 

Click Configure.

On the General tab, change the location to either local path(if the m3u file is located on your android box/stick/pc had drive) or remote path(if its hosted on the web), and then locate your m3u file.
paste your M3U line over there.

press “EPG Settings” tab and paste EPG’s Link

Then click “Channels Logos” tab and set “Channels Logos from XMLTV” on “Prefer M3U”, finally press “OK”.

Now click on “Enable” button. 

Then press the X to close the menu, and press the kodi home button. Now exit the app.

Restart Kodi; you should notice “PVR manager is starting up” and it will begin loading the channels.

You will now notice a TV section on kodi, go inside that and you will see your channels.

Now simply select a channel, allow it to load/buffer(will depend on your internet speed) and there you have it. GenIPTV working on a Kodi PVR client, as opposed to having a program that loads channels (ike Stalker).

You can click on “Guide” button and see channels’ EPG.

 

EPG Guide links

DK –http://estiptv.site/epg/DK_guide.xml.gz or http://estiptv.site/epg/DK_guide.xml
EE – http://estiptv.site/epg/EE_guide.xml.gz or http://estiptv.site/epg/EE_guide.xml
FI – http://estiptv.site/epg/FI_guide.xml.gz or http://estiptv.site/epg/FI_guide.xml
NO – http://estiptv.site/epg/NO_guide.xml.gz or http://estiptv.site/epg/NO_guide.xml
SE – http://estiptv.site/epg/SE_guide.xml.gz or http://estiptv.site/epg/SE_guide.xml
BE/NL – http://estiptv.site/epg/NL_guide.xml.gz or http://estiptv.site/epg/NL_guide.xml
DE – http://estiptv.site/epg/DE_guide.xml.gz or http://estiptv.site/epg/DE_guide.xml
ES – http://estiptv.site/epg/ES_guide.xml.gz or http://estiptv.site/epg/ES_guide.xml
FR – http://estiptv.site/epg/FR_guide.xml.gz or http://estiptv.site/epg/FR_guide.xml
UK – http://estiptv.site/epg/UK_guide.xml.gz or http://estiptv.site/epg/UK_guide.xml
IT – http://estiptv.site/epg/IT_guide.xml.gz or http://estiptv.site/epg/IT_guide.xml
ex-Yu http://estiptv.site/epg/EY_guide.xml.gz or http://estiptv.site/epg/EY_guide.xml
PL – http://estiptv.site/epg/PL_guide.xml.gz or http://estiptv.site/epg/PL_guide.xml
RU – http://estiptv.site/epg/RU_guide.xml.gz or http://estiptv.site/epg/RU_guide.xml
TR – http://estiptv.site/epg/TR_guide.xml.gz or http://estiptv.site/epg/TR_guide.xml
MX – http://estiptv.site/epg/MX_guide.xml.gz or http://estiptv.site/epg/MX_guide.xml
US – http://estiptv.site/epg/US_guide.xml.gz or http://estiptv.site/epg/US_guide.xml
DK/EE/FI/NO/SE – http://estiptv.site/epg/SCAND_guide.xml.gz or http://estiptv.site/epg/SCAND_guide.xml
BE/NL/DE/ES/FR/UK/IT – http://estiptv.site/epg/EU_guide.xml.gz or http://estiptv.site/epg/EU_guide.xml
EY/PL/RU/TR – http://estiptv.site/epg/EEU_guide.xml.gz or http://estiptv.site/epg/EEU_guide.xml
MX/US – http://estiptv.site/epg/AMER_guide.xml.gz or http://estiptv.site/epg/AMER_guide.xml
SCAND/EU/EEU/AMER – http://estiptv.site/epg/IPTV_guide.xml.gz or http://estiptv.site/epg/IPTV_guide.xml

Press OK

Restart Kodi

EPG Program info

DK – http://estiptv.site/epg/DK_guide.xml.gz or http://estiptv.site/epg/DK_guide.xml

EE – http://estiptv.site/epg/EE_guide.xml.gz or http://estiptv.site/epg/EE_guide.xml

FI – http://estiptv.site/epg/FI_guide.xml.gz or http://estiptv.site/epg/FI_guide.xml

NO – http://estiptv.site/epg/NO_guide.xml.gz or http://estiptv.site/epg/NO_guide.xml

SE – http://estiptv.site/epg/SE_guide.xml.gz or http://estiptv.site/epg/SE_guide.xml

BE/NL – http://estiptv.site/epg/NL_guide.xml.gzor http://estiptv.site/epg/NL_guide.xml

DE – http://estiptv.site/epg/DE_guide.xml.gz or http://estiptv.site/epg/DE_guide.xml

ES – http://estiptv.site/epg/ES_guide.xml.gz or http://estiptv.site/epg/ES_guide.xml

PT – http://estiptv.site/epg/PT_guide.xml.gz or http://estiptv.site/epg/PT_guide.xml

FR – http://estiptv.site/epg/FR_guide.xml.gz or http://estiptv.site/epg/FR_guide.xml

UK – http://estiptv.site/epg/UK_guide.xml.gz or http://estiptv.site/epg/UK_guide.xml

IT – http://estiptv.site/epg/IT_guide.xml.gz or http://estiptv.site/epg/IT_guide.xml

EX-YU http://estiptv.site/epg/EY_guide.xml.gz or http://estiptv.site/epg/EY_guide.xml

PL – http://estiptv.site/epg/PL_guide.xml.gz or http://estiptv.site/epg/PL_guide.xml

RU – http://estiptv.site/epg/RU_guide.xml.gz or http://estiptv.site/epg/RU_guide.xml

TR – http://estiptv.site/epg/TR_guide.xml.gz or http://estiptv.site/epg/TR_guide.xml

MX – http://estiptv.site/epg/MX_guide.xml.gz or http://estiptv.site/epg/MX_guide.xml

US – http://estiptv.site/epg/US_guide.xml.gz or http://estiptv.site/epg/US_guide.xml

DK/EE/FI/NO/SE – http://estiptv.site/epg/SCAND_guide.xml.gz or http://estiptv.site/epg/SCAND_guide.xml

BE/NL/DE/ES/PT/FR/UK/IT – http://estiptv.site/epg/EU_guide.xml.gz or http://estiptv.site/epg/EU_guide.xml

EY/PL/RU/TR – http://estiptv.site/epg/EEU_guide.xml.gz or http://estiptv.site/epg/EEU_guide.xml

MX/US – http://estiptv.site/epg/AMER_guide.xml.gz or http://estiptv.site/epg/AMER_guide.xml

SCAND/EU/EEU/AMER – http://estiptv.site/epg/IPTV_guide.xml.gz or http://estiptv.site/epg/IPTV_guide.xml

Mag iptv box

Go to Settings then System Settings
2. Go to Software Update, then press OK then the Red button to update the software. Wait a few minutes and the box will restart.
3. Go to Settings then System Settings.
4. Go to Video and change to 1080p and 1920 × 1080 Press OK and go back (SHIPPING THIS MAG256 STEP IF IT MAKES THIS SELL)
5. Go to Servers
6. Go to General and enter pool.ntp.org press OK and go back
7. Touch Portals
8. In the First Portal, enter this
Portal Name: Bestofiptv
Portal URL: (You get it from us.)
You do not need to fill in any other Portals. Press OK to save and return.
9. Go to Advanced Settings and change time zone to your zone to get EPG functioning. Press OK to save
Now you go back until you get out, the box will say it needs to reboot to use the new settings. Let it restart.
Now you come to IPTV Portal. Before you start watching TV, do one last thing. Go to Right until you reach Settings, then Advanced Settings and change Buffer Size from 0 to 15, scroll down the list and press OK.
Now you can start watching TV.

Supports Popular Applications

VLC Player

If you would like to watch your  IPTV on your PC, VLC player is the easiest and mostly used app for windows and iOS devices. You can also use its android version on your mobile devices.

Perfect player

If you are not a computer person, Perfect Player would be a good option for you. Installing and using of this application is very user friendly. You won’t be able to have Catch up feature with this app. And for the EPG, please ask from our customer service for the addition URL for EPG.

GSE Smartiptv

You may find many apps for your iOS devices, but if you are looking for a free and high quality app for iPhone and iPad, we strongly suggest you to install GSE player. Android users can also install it into their mobile devices. Installation if very easy with one playlist URL that you will receive from us.

Smartiptv

If you have Samsung or LG Smart TV, this app will replace your smart iptv app or any box attached to your TV. No hardware required! And very easy to install from your TV’s apps.

Your TV’s remote control will also help you navigate thru our live channels and videos.

Perfect Player IPTV

Go to Google Play store and download Perfect Player IPTV

Download URL : Click here

Please follow all 14 steps 

1 – Open Perfect Player

image

2 – Go to Settings

image

3 – Now you are into Settings Page , Go to Genaral

image

4 – Go to Playlist and enter your URL and add by Name ALL IPTV after you done click on OK

image

5 – Go to EPG

image

6 – Enter your EPG URL after you done click on OK

image

7 – Go back to your Settings Page and go to Playback

image

8 – Check ONLY change system volume

image

9 – Go back to your Settings Page and go to GUI

10 – Check ONLY Show channels as group folder

11 – Restart Perfect Player

12 – Now you see channels list on the left side

13 – Press left button on the remote controller now you have all channels on group folder

14 – Go to any folder and enjoy to watch all channels

FORMULER BOX (Z7, Z8)

Go into the app MY TVOnline
You will get a pop up box, click edit,
– Portal name: BestofIPTV
– Portal URL:  (You get it from us.)
– then press “save”

All Mag Box Issue Fixed!

All Mag Box Issue Fixed!

I recommend using the following images These will preserve portal settings, but disables the block and prevents any remote updates from Infomir’s servers. If you have already used previous custom firmware or installed any other “anti_block settings” then remove all settings to which you have access before trying to install this Better is to install original Infomir software first even by allowing updates and allowing them to complete is OK. This software will fix block later.
mag250  https://mega.nz/#F!Q4YkDKQT!46cNMVY-KRNIm3tYoGR0rg
mag254  https://mega.nz/#F!k0ImBCKA!bbNSbss1wXmOfxGK1Y2KdQ
mag256  https://mega.nz/#F!14QSBaqJ!95LkP7PoVbnTAA-2BqL7NA
mag322  https://mega.nz/#F!w0JE1ILA!6tDfPWlkbG1c6tuA4bTSew
mag324  https://mega.nz/#F!1hICAQwI!KsxN8jSyBs3Nx6ClJhuMog
some mag models will not have the Bootstrap included as a separate ‘file’ in that folder. That’s OK, just ensure you transfer the correct folder onto USB device.  
MAG254 and earlier can be picky about which sticks they recognize, you may need to try a few – don’t use USB3.0 sticks.
To ensure the installation works please install from the recovery area of Mag (hold down menu button during reboot) – Put files on usb (FAT32) in folder named mag*** (*** is your Magbox number e.g.mag256) – Reset to default first then use usb to downgrade.

 

Video guides for updating all MAGs are on Infomir site
Different for each type of box and need to be used with the specific instructions
e.g For 3 series = Guide: https://wiki.infomir.eu/eng/set-top…24-349-351/software-update-mag322-324-349-351And video can be found half way down page (ctrl +f search for video if you dont see it)
For 2 series except 256https://wiki.infomir.eu/eng/set-top…mag250-254-270/software-update-mag250-254-270Video half way down page
For 256https://wiki.infomir.eu/eng/set-top-box/stb-linux-webkit/mag256/software-update-mag256Video same as 2 series other stuff different

 

 

Zgemma box

On Zgemma box you need to find the IP address:

  • Go to menu, system, information, network and make a note of the IP address

Google ‘PUTTY’ or click the link below:

Select this version if using windows:

Find PUTTY in your download folder

Open PUTTY and type in your IP address of Zgemma into the HOST name (or IP address) box

You will now see the screen below:

Type root and press enter

The copy the line I sent you

Go back to putty, right click and press enter

This will create your new BOUQUET called MY_BOUQUET where your channels will be

ADDING M3U FILE TO IPTV PLAYER ON ZGEMMA WITH IPTV PLAYER

Save the file I email to you onto your desktop

Download a program called ‘WINSCP’ – https://winscp.net/eng/index.php

Open WIN SCP

In host name type in the IP address of your Zgemma

Username type in root

On the right hand side box double click the 3 dots

Repeat above

Double click ‘HDD’

Double click ‘M3U file we sent you’

On the left hand side box, find the playlist you were sent you on your desktop

Right click on it

Click upload – once it says complete you have your M3U file on your Zgemma

Now go to your Zgemma remote

Press Menu, IPTV PLAYER,

Open Local Media

Then media/hdd, the M3U file we sent you

Click on your playlist and your channels will appear

Channels

ENJOY Your Watching with

Enigma2/Dreambox/Vu+

1- Go to your Enigma2 and get your IP address

Go to Settings/Setup/System Network Device Setup Adapter Settings

And get your IP address it starts with 192.168….

4 – Go to you windows PC and download Putty

Putty download url https://the.earth.li/~sgtatham/putty/latest/x86/putty.exe

5- Open Putty add follow this steps

add your IP address of your Enigma ( Same IP as step 3 ) Port 23 Connection type Telenet Click on open

6 – Your default login and password are root

7 – Copy your line  ( you will get it after you order your subscription )

8 – use RIGHT CLICK MOUSE BUTTON after you enter your line press ENTER

9 – Type reboot and your device will restart

Now you will find IPTV folder , all IPTV channels are inside your IPTV folder

Roku

Setup IPTV on Roku

1- Search for M3U Playlist Player into

  1. Go to Streaming channels
  2. Go to Search channels 
  3. And search fot M3U Playlist player
  4. And select M3u Playlist player

image

2- Click on Go to channels

image

3- Select New Playlist

image

4- add your Add IPTV GATOR A if you use Server A or add IPTV GATOR B  If you use Server B and press NEXT

image

Add here your M3U URL and press SAVE

image

  1. Wait for loading channels
  2. Restart your app
  3. select the playlist you add
Now you are ready to watch channels on your Roku box
mart stb guide for samsung smart tv

An emulator based on magbox and actually gives you a real feel of a digital box with Smart STB gives you a stable view of all channels and everything is sorted in order.
Even here you get a test period of 7 days ago, we recommend that you buy the app for $ 270.
Download Smart STB
Start the app when you see Loading portal on the tv then press ok (middle button)
1. Go to system settings
2. Write down the Virtua mac address and security check the mac address then you specify it when applying for a test or subscription purchase.
3.Create now to https://smart-stb.net/ and create an account
4.Click the Device Mac Mac address on Smart STB website
5. Under Portals, type the following:  (You get it from us.)
6. Select Save

Smart TV

This tutorial will guide you through the simple setup instruction for a Samsung/LG Smart TV. BestofIPTV service uses a media controller app called ‘Smart IPTV’, this app is free to use for a period of seven days, you will then be asked to make a one time donation of € 5.49 (Euros) towards the Smart IPTV app development.

  1. In order to check if your Samsung or LG Smart TV is compatible with the BestofIPTV Service go to the Samsung or LG Smart TV screen and search for the ‘Smart IPTV’ app. If the app is not displayed on the main screen you may have to search for it in ‘All Apps’ or ‘Updates’.
  2. Launch the ‘Smart TV’ app.
  3. Make a note of the ‘MAC Address’ which is displayed on the screen.
  4. Go to http://siptv.eu/mylist/ from any web browser.
  5. Go to the section titled ‘Add external playlist links (URLs)’ and enter your ‘Mac’ address and the unique BestofIPTV Playlist URL into the ‘Link’ field.
    NB: If you do not have a playlist URL you can request a trial here: Request Trial
  6. Ensure the ‘countries’ dropdown selection on ‘Various’.
  7. If you have any problems with the playlist loading you can place a check in the ‘Keep online’ checkbox.
  8. Click onto the ‘Add Link’ button
  9. Restart the ‘Smart IPTV’ app or TV.
  10.  In order to view channel groups, press the blue button on your remote control.

1 – Download Smart IPTV into your TV

( This is only for Samsung and LG Smart TV )

  1. Go to you TV apps
  2. Search for Smart IPTV
  3. Install Smart IPTV and open Smart IPTV

Now you can see your MAC address on the right side on your screen

2- Add channels into Smart IPTV

  1. Go to www.siptv.eu/mylist/
  2. Add your MAC and your M3U URL
  3. Click on Add Link

Smart IPTV app insctruction

Now you are ready to watch our channels

important to know!!

After you install the app it is free to use for only 7 days after that you need to buy this app for 5,49EUR/lifetime

Go to http://siptv.eu/activation/ and activate for lifetime

How to configure Kodi for IPTV

Firstly, you must have your m3u file on the device you want to use it on(android box, fire stick, pc etc)
Download Kodi :
Now, on Kodi go to:

System > TV > General > Enabled.

It will tell you there is no PVR add-on enabled, click OK.
It will now present you with a list of PVR clients.
Scroll down to “PVR IPTV Simple Client“, click it. 

Click Configure.

On the General tab, change the location to either local path(if the m3u file is located on your android box/stick/pc had drive) or remote path(if its hosted on the web), and then locate your m3u file.
paste your M3U line over there.

press “EPG Settings” tab and paste EPG’s Link

Then click “Channels Logos” tab and set “Channels Logos from XMLTV” on “Prefer M3U”, finally press “OK”.

Now click on “Enable” button. 

Then press the X to close the menu, and press the kodi home button. Now exit the app.

Restart Kodi; you should notice “PVR manager is starting up” and it will begin loading the channels.

You will now notice a TV section on kodi, go inside that and you will see your channels.

Now simply select a channel, allow it to load/buffer(will depend on your internet speed) and there you have it. GenIPTV working on a Kodi PVR client, as opposed to having a program that loads channels (ike Stalker).

You can click on “Guide” button and see channels’ EPG.

 

EPG Guide links

DK –http://estiptv.site/epg/DK_guide.xml.gz or http://estiptv.site/epg/DK_guide.xml
EE – http://estiptv.site/epg/EE_guide.xml.gz or http://estiptv.site/epg/EE_guide.xml
FI – http://estiptv.site/epg/FI_guide.xml.gz or http://estiptv.site/epg/FI_guide.xml
NO – http://estiptv.site/epg/NO_guide.xml.gz or http://estiptv.site/epg/NO_guide.xml
SE – http://estiptv.site/epg/SE_guide.xml.gz or http://estiptv.site/epg/SE_guide.xml
BE/NL – http://estiptv.site/epg/NL_guide.xml.gz or http://estiptv.site/epg/NL_guide.xml
DE – http://estiptv.site/epg/DE_guide.xml.gz or http://estiptv.site/epg/DE_guide.xml
ES – http://estiptv.site/epg/ES_guide.xml.gz or http://estiptv.site/epg/ES_guide.xml
FR – http://estiptv.site/epg/FR_guide.xml.gz or http://estiptv.site/epg/FR_guide.xml
UK – http://estiptv.site/epg/UK_guide.xml.gz or http://estiptv.site/epg/UK_guide.xml
IT – http://estiptv.site/epg/IT_guide.xml.gz or http://estiptv.site/epg/IT_guide.xml
ex-Yu http://estiptv.site/epg/EY_guide.xml.gz or http://estiptv.site/epg/EY_guide.xml
PL – http://estiptv.site/epg/PL_guide.xml.gz or http://estiptv.site/epg/PL_guide.xml
RU – http://estiptv.site/epg/RU_guide.xml.gz or http://estiptv.site/epg/RU_guide.xml
TR – http://estiptv.site/epg/TR_guide.xml.gz or http://estiptv.site/epg/TR_guide.xml
MX – http://estiptv.site/epg/MX_guide.xml.gz or http://estiptv.site/epg/MX_guide.xml
US – http://estiptv.site/epg/US_guide.xml.gz or http://estiptv.site/epg/US_guide.xml
DK/EE/FI/NO/SE – http://estiptv.site/epg/SCAND_guide.xml.gz or http://estiptv.site/epg/SCAND_guide.xml
BE/NL/DE/ES/FR/UK/IT – http://estiptv.site/epg/EU_guide.xml.gz or http://estiptv.site/epg/EU_guide.xml
EY/PL/RU/TR – http://estiptv.site/epg/EEU_guide.xml.gz or http://estiptv.site/epg/EEU_guide.xml
MX/US – http://estiptv.site/epg/AMER_guide.xml.gz or http://estiptv.site/epg/AMER_guide.xml
SCAND/EU/EEU/AMER – http://estiptv.site/epg/IPTV_guide.xml.gz or http://estiptv.site/epg/IPTV_guide.xml

Press OK

Restart Kodi

EPG Program info

DK – http://estiptv.site/epg/DK_guide.xml.gz or http://estiptv.site/epg/DK_guide.xml

EE – http://estiptv.site/epg/EE_guide.xml.gz or http://estiptv.site/epg/EE_guide.xml

FI – http://estiptv.site/epg/FI_guide.xml.gz or http://estiptv.site/epg/FI_guide.xml

NO – http://estiptv.site/epg/NO_guide.xml.gz or http://estiptv.site/epg/NO_guide.xml

SE – http://estiptv.site/epg/SE_guide.xml.gz or http://estiptv.site/epg/SE_guide.xml

BE/NL – http://estiptv.site/epg/NL_guide.xml.gzor http://estiptv.site/epg/NL_guide.xml

DE – http://estiptv.site/epg/DE_guide.xml.gz or http://estiptv.site/epg/DE_guide.xml

ES – http://estiptv.site/epg/ES_guide.xml.gz or http://estiptv.site/epg/ES_guide.xml

PT – http://estiptv.site/epg/PT_guide.xml.gz or http://estiptv.site/epg/PT_guide.xml

FR – http://estiptv.site/epg/FR_guide.xml.gz or http://estiptv.site/epg/FR_guide.xml

UK – http://estiptv.site/epg/UK_guide.xml.gz or http://estiptv.site/epg/UK_guide.xml

IT – http://estiptv.site/epg/IT_guide.xml.gz or http://estiptv.site/epg/IT_guide.xml

EX-YU http://estiptv.site/epg/EY_guide.xml.gz or http://estiptv.site/epg/EY_guide.xml

PL – http://estiptv.site/epg/PL_guide.xml.gz or http://estiptv.site/epg/PL_guide.xml

RU – http://estiptv.site/epg/RU_guide.xml.gz or http://estiptv.site/epg/RU_guide.xml

TR – http://estiptv.site/epg/TR_guide.xml.gz or http://estiptv.site/epg/TR_guide.xml

MX – http://estiptv.site/epg/MX_guide.xml.gz or http://estiptv.site/epg/MX_guide.xml

US – http://estiptv.site/epg/US_guide.xml.gz or http://estiptv.site/epg/US_guide.xml

DK/EE/FI/NO/SE – http://estiptv.site/epg/SCAND_guide.xml.gz or http://estiptv.site/epg/SCAND_guide.xml

BE/NL/DE/ES/PT/FR/UK/IT – http://estiptv.site/epg/EU_guide.xml.gz or http://estiptv.site/epg/EU_guide.xml

EY/PL/RU/TR – http://estiptv.site/epg/EEU_guide.xml.gz or http://estiptv.site/epg/EEU_guide.xml

MX/US – http://estiptv.site/epg/AMER_guide.xml.gz or http://estiptv.site/epg/AMER_guide.xml

SCAND/EU/EEU/AMER – http://estiptv.site/epg/IPTV_guide.xml.gz or http://estiptv.site/epg/IPTV_guide.xml

Mag iptv box

Go to Settings then System Settings
2. Go to Software Update, then press OK then the Red button to update the software. Wait a few minutes and the box will restart.
3. Go to Settings then System Settings.
4. Go to Video and change to 1080p and 1920 × 1080 Press OK and go back (SHIPPING THIS MAG256 STEP IF IT MAKES THIS SELL)
5. Go to Servers
6. Go to General and enter pool.ntp.org press OK and go back
7. Touch Portals
8. In the First Portal, enter this
Portal Name: Bestofiptv
Portal URL: (You get it from us.)
You do not need to fill in any other Portals. Press OK to save and return.
9. Go to Advanced Settings and change time zone to your zone to get EPG functioning. Press OK to save
Now you go back until you get out, the box will say it needs to reboot to use the new settings. Let it restart.
Now you come to IPTV Portal. Before you start watching TV, do one last thing. Go to Right until you reach Settings, then Advanced Settings and change Buffer Size from 0 to 15, scroll down the list and press OK.
Now you can start watching TV.

Supports Popular Applications

VLC Player

If you would like to watch your  IPTV on your PC, VLC player is the easiest and mostly used app for windows and iOS devices. You can also use its android version on your mobile devices.

Perfect player

If you are not a computer person, Perfect Player would be a good option for you. Installing and using of this application is very user friendly. You won’t be able to have Catch up feature with this app. And for the EPG, please ask from our customer service for the addition URL for EPG.

GSE Smartiptv

You may find many apps for your iOS devices, but if you are looking for a free and high quality app for iPhone and iPad, we strongly suggest you to install GSE player. Android users can also install it into their mobile devices. Installation if very easy with one playlist URL that you will receive from us.

Smartiptv

If you have Samsung or LG Smart TV, this app will replace your smart iptv app or any box attached to your TV. No hardware required! And very easy to install from your TV’s apps.

Your TV’s remote control will also help you navigate thru our live channels and videos.

Perfect Player IPTV

Go to Google Play store and download Perfect Player IPTV

Download URL : Click here

Please follow all 14 steps 

1 – Open Perfect Player

image

2 – Go to Settings

image

3 – Now you are into Settings Page , Go to Genaral

image

4 – Go to Playlist and enter your URL and add by Name ALL IPTV after you done click on OK

image

5 – Go to EPG

image

6 – Enter your EPG URL after you done click on OK

image

7 – Go back to your Settings Page and go to Playback

image

8 – Check ONLY change system volume

image

9 – Go back to your Settings Page and go to GUI

10 – Check ONLY Show channels as group folder

11 – Restart Perfect Player

12 – Now you see channels list on the left side

13 – Press left button on the remote controller now you have all channels on group folder

14 – Go to any folder and enjoy to watch all channels

FORMULER BOX (Z7, Z8)

Go into the app MY TVOnline
You will get a pop up box, click edit,
– Portal name: BestofIPTV
– Portal URL:  (You get it from us.)
– then press “save”